5. Spoofing

1. Open Mureh Checker.exe, copy everything into a document and save

2. Perform these actions before the Spoof and after the Spoof, then compare your Serial Numbers

3. Before spoofing, change the MAC address using the batch file (MacChange.bat — run it as Administrator). If the MAC address does not change via the batch file, download the TMAC program and change the MAC address using it (there are guides on YouTube on how to change the MAC address with this program).

HWID spoof

1. Run the Loader

2. Enter the key (check the box «Remember me»)

3. Log in

PERM FIXER

Run the perm fixer, then reboot the system for the changes to take effect.

DOWNLOAD HERE: https://www.dropbox.com/scl/fi/6egcpgo5mggy4ftoxwzwu/Perm-Fixer.bat?rlkey=i2kophi3npcl0992blgxs6x3b&st=jvpcrcfy&dl=0

NEVER USE THE Hyper-V SPOOF METHOD

UEFI

Click UEFI Spoof

1. Select your motherboard and click "Spoof" (if you have a different one — click "Other").

2. Reboot the PC

3. Open the Checker and compare the serial numbers

4. Now proceed to Device Setup